Spa Instant Filter Cleaner can be used on regular basis (ideally weekly) and offers a quick solution to cleaning Cartridge Filters. The unique “trace dye” shows where you have sprayed the product so that you can ensure complete coverage of the filter. Instructions 1. Remove filter(s) from spa or hot tub compartment. 2. Immediately place the filter(s) into a suitable clean bucket and allow the water to drain, then dispose of this water. 3. Spray the Spa Instant Filter all over the filter “veins” allowing good penetration of product, ensure product is applied in a well-ventilated area and avoid applying during windy days. 4. The trace dye will show where the Spa Instant Filter has been applied, do not over apply the product. 5. Leave to soak in the clean bucket for 30 – 40 minutes and away from direct sunlight. 6. Rinse cartridge with hose ensuring all product is removed, foaming will occur during this process. 7. When clean return the cartridge(s) to the spa or hot tub compartment 8. If you experience difficulties please contact your local dealer. PRECAUTIONS • Always ensure bathers are out of the water when adding chemicals. • Never mix with any other chemicals including cleaning products, weed killers and chlorine products, as a dangerous reaction may occur. • Always handle products in a well-ventilated area. • Always wash hands thoroughly after handling chemicals. • Store in a cool, dry, well ventilated, secure place. Ensure chemicals do not become damp in storage. • Instructions and dosages given are a guide to most effective use. WARNING • This container must not be used or contaminated with any other materials.
Spa Instant Filter Cleaner 6 x 500ml
- Product Code: SpaChem
- Availability: 95
- Ex Tax: £37.80