HTH Granular 10kg, 2225
The reliable HTH® granular range of products are strong oxidizers, allowing for the continual chlorination of water. These products provide efficient disinfection and aid in the elimination of bacteria, viruses, fungi and algae over a broad spectrum of applications. Such applications include industrial, municipal, commercial and food and beverage applications.
Efficient and easy to handle form of active chlorine when compared to a high concentrated solid form of active chlorine
Can be used as a shock treatment
Treats microbial organisms that could cause corrosion of equipment, therefore resulting in potential saving of water, energy and other costs
Typical available chlorine content of ±68%
Product packaging sizes: 10kg, 25kg, 40kg and 45kg pails
Size: 10kg Chlorine
source for shock treatment of pools and spas.
Also ideal for routine treatment of indoor pools.
Sanitizer and disinfectant. Dissolves rapidly.
Typical chlorine content 68%. Helps maintain low pool TDS (Total Dissolved Solids) level.
Helps maintain water hardness
. Slightly alkaline pH.
ALWAYS PRE-DISSOLVE THIS PRODUCT IN WARM WATER BEFORE
DOSING YOUR POOL. DOSE INFORMATION
To obtain maximum benefit from HTH Granules, the pH of the pool or spa water should be maintained around 7.5 and between 7.2 and 7.6 at all times. Above pH 7.6 the value of chlorine will be reduced. For routine use a sanitiser, use 150g HTH Granules per 100 cubic metres of pool water (2.4 oz. to 10,000 gallons). Heavily used pools and those maintained at higher temperatures will require increased dosage. Test for actual requirements by using a poolside test kit or test strip - adjusting the dose rate as necessary to maintain a minimum free chlorine level of 2 ppm.
CHLORINE SHOCK DOSING Use 875g HTH Granules per 100 cubic metres of pool or spa water (14 oz. to 10,000 gallons) to provide a chlorine shock dose of approximately 5 ppm. For more accurate shock dosing advice, please refer directions on container.
APPLICATION Add HTH Granules into 10 litres of fresh water, using a clean plastic container, and mix carefully. Slowly pour the solution into the pool or spa water close to the return inlet and rinse out container thoroughly after use.
NEVER DOSE DRY HTH GRANULES DIRECTLY INTO YOUR POOL OR SPA, OR YOU MAY DAMAGE POOL FINISHES.