Spa Water Management
Answer: Over the next few weeks the
SpaChem team will be discussing and supporting hot tub owners with
troubleshooting guides with what to do when you lift off the cover and find
that the water is far from crystal clear. It doesn’t matter which make, model
or size of hot tub you own; the general rule of water
management is the same for all.
Starting with one of the more common
What’s causing it?
Green hot tub water is commonly caused by a simple, non-flowering aquatic plant. Ok, that’s just a nicer way of saying that its highly probable that you have algae in your water after all, algae love to grow under the cover of your hot tub in the dark yet warm water environment.
One of the simplest methods to test if it is algae causing this problem, is to touch the inside of your hot tub walls, if it feels slightly slimy to the touch, then the chances are its algae. The likelihood is that this has happened due to either insufficient sanitizer levels (Chlorine or Bromine) in your hot tub or your filter is not performing at its best.
How to solve it.
Test the pH and alkalinity of your hot tub water and try a Hot Tub Shock / Non-Chlorine Oxy Shock. After filtering out the dead algae we would recommend that you look to clean your filter to remove any loitering algae. For more information on the products available and how to conduct a shock treatment, visit https://spachem.co.uk/hot-tub-shock
If the above has not rectified the problem and 24 hours later, your water is far from crystal clear, then it’s time to drain your water, thoroughly wipe all of the internal surfaces of your hot tub (to remove any remaining algae), replace your filter and refill with freshwater, not forgetting to balance your waters Total Alkalinity, then pH which will ensure you are giving your sanitizer the best water environment to work at its best.
There are other causes of green water such as the presence of minerals (copper, manganese, and iron is the main culprits) from the pipes that fill your hot tub, or even present in your household water and don’t forget the no-go rules around fake tan. The chemicals in your hot tub will react with the fake tan and result in some interesting shades of brown and green on the sides of your hot tub and in the water!
Spa Non Chlorine Oxy Shock Granules 5kg, N0-V6HM-NXYK
Use Spa Non Chlorine Oxy-Shock on a weekly basis or after heavy use of the Spa or Hot Tub. This product will break down the organic contaminants and un-filterable waste sometimes found in the water which can result in unpleasant smells / odours and a reduction in bather comfort. Spa Non Chlorine Oxy-Shock can also improve the efficiency of the Bromine sanitiser.
1. Dose at the rate of 20g per 1000lts of water on weekly basis or immediately after heavy use.
2. Ensure circulation is on when adding directly to the water and preferably with all diverter valves open.
3. Leave Spa / Hot Tub Cover off during treatment.
4. Ensure circulation is running for a minimum of 1 hour to achieve full effect of product.
5. If you experience problems with the water please contact your local dealer.
• Always ensure bathers are out of the water when adding chemicals.
• Never mix with any other chemicals including cleaning products, weed killers and chlorine products, as a dangerous reaction may occur.
• Always handle products in a well-ventilated area.
• Always wash hands thoroughly after handling chemicals.
• Store in a cool, dry, well ventilated, secure place. Ensure chemicals do not become damp in storage. • Instructions and dosages given are a guide to most effective use.
• This container must not be used or contaminated with any other materials.
Spa Non Chlorine Shock Granules 5kg
- Brand: SpaChem
- Product Code: SpaChem
- Availability: 2
- Ex Tax: £49.99